On the internet, on many online forums can meet with opinions on extracting the unpleasant smells, spreading algae, sediment stone, etc. Meanwhile, in most cases, this type of phenomena occur due to gross negligence by the user (in its history had the opportunity to meet the case where a user for a period of six months not cleaned whirlpool systems in the bathtub - you guessed what the effects were ...). At this point, we wanted to introduce you briefly simple and effective method of taking care of the cleanliness and maintenance of such products.

Cleaning and maintenance coatings of acrylic bathtub, steam room or shower cabin

Complete maintenance of all equipment and coatings must be min. 2 times a month. Adhere to the following recommendations to prevent the destruction or damage of elements of acrylic glass or chrome:

  • after bathing rinse the surface clean with hot water, cleaned of residual sludge (soap, hair, etc.), wipe with a damp soft cloth to dry and turn off the power
  • small stains can be removed with warm water and liquid detergent with a neutral pH (eg. washing-up liquid), or soap solution
  • stronger stains removed with a soft cloth or sponge, using chemicals reputable manufacturers for cleaning bathroom fittings, who on the product packaging clearly indicate their usage and purpose of use
  • use acetone, ammonia, carbinol, formyl, formaldehyde, abrasives, acids, solvents, alcohol, or other harsh chemicals, etc. is strictly prohibited, as it may damage the surfaces, acrylic, chrome bath or the shower!
  • cleaning and polishing the outer coating bath or the shower not use abrasive cloths, sharp sponges, brushes with metal wires, sharp and heavy tools (eg. a knife, scraper, etc.).
  • sedimentary stone can remove dissolved citric acid or a warm solution of water and vinegar in a ratio of 1: 1. To avoid scaling wipe bath to dry after each bath. In the case where the pH is too high it is recommended to use a water softener in order to prevent the deposition of calcareous deposits on the surfaces of the product
  • applied to the cleaning cloth or sponge, not directly on the surface of the product itself. After removing dirt and deposits with plenty of water and wipe the surface with a damp cloth
  • glass elements and windows cleaned using commercial products to clean the windows, do not contain ammonia
  • if the water is drained too slowly from the drain, remove the grid drain, remove debris and screw
  • chrome parts (bathtub faucet or shower jets, shower head etc.) do not require frequent cleaning, they should be wiped with a damp cloth only (not dry)
  • should be regularly cleaned outlets elements spray bathtub faucet or shower with sedimentary stone (especially the nozzles in headphones) - the clogging may result in a reduced capacity of water or unsealing

Impregnating glass and acrylic coating, prevents the formation of limescale

To ensure perfect coating, free from the limescale for years, periodically apply special preparations impregnating coating product. Enjoy a perfect impregnating agent HG Poland, more details you will find here.

Cleaning and disinfection of whirlpool bathtub

Technical solutions used in hydromassage bathtubs of Essente guarantee a high degree of prevention in the hygiene and the ability to effectively disinfect the hydromassage system. System design based on rigid pipes, high smoothness and adequate internal pump system ensure adequate purity of the system and prevent the formation of deposits inside. The first thing we need to obtain, joining the disinfection of the whirlpool systems is the acquisition of a suitable fluid, we recommend you a very good HG liquid disinfectant baths with hydromassage-systems. For bathtubs equipped with an automatic disinfection system (option), turn on the button on the control panel, the system will start the cleaning procedure (it lasts approx. 20 minutes). In the case of bathtubs without an automatic disinfection just follow these simple tips:

  • clean the surface of the tub, drain using a commercially available cleaning agents
  • Fill the bathtub with warm water with a temperature of approx. 35-40 degrees Celsius line approx. 5 cm above the nozzle openings for supply of air or water jets
  • pour the liquid into the cleaning and disinfection systems massage, usually around. 50-100ml (check the label of the product)
  • Run for 15 minutes systems of air massage and water hydromassage
  • turn off the water pump and air, open the drain cock and drain the water out of the tub
  • Refill the tub with clean, cold water according to the instructions of the point. 1, run the air massage and hydromassage water for approx. 3-4 minutes, do not pour any liquid for disinfection, cleaning, etc..
  • open the faucet drain completely drain the water from the tub, at the end of the bath, wipe the surface dry with a soft cloth
HG liquid disinfectant whirlpool bathtub systems

HG Hygienic liquid for whirlpool bathtubs


  • based on natural ingredients
  • destroys bacteria
  • removes odors
  • removes limescale, grease, sludge
  • environmentally friendly
Impregnation liquid of HG Polska

Impregnation liquid of HG Polska
Capacity 0.25 l

  • protects against limescale, dirt and stains
  • glassware, chrome, plastic products, aluminum, ceramic tile

Protects all surfaces in the bathroom in front of a stone sediment, dirt, traces of the hands, the remnants of soap, bath oils, etc. Thanks to the unique properties of the impregnating not only delivers pristine purity but also facilitates the ongoing care of the secured area. It is effective for many months.